Wirepak-W-Specification | Panel Filters

SPECIFICATION FOR WASHABLE PRIMARY PANEL FILTER

Air filters shall be the WIREPAK-W heavy duty, medium efficiency, pleated washable panel type

MEDIA

The filter media shall be genuine WIRECOR progressive efficiency type comprising a first stage of 120g/m2 high lofted uncoated needled polyester fibre mat followed by a second stage of 230g/m2 acrylic coated needle polyester fibre mat which shall allow full depth dust loading negating the face loading tendency of most continuous efficiency media.

The first and second stage medias shall be permanently bonded together by hotmelt coated 1,2mm diameter galvanized wire spaced at intervals of no more than 50mm by the WIRECOR media manufacturing process.

The lateral internal heavy duty wire support when pleated shall keep the pleat in shape after washing and prevent pleat vibration and collapse, a tendency of self supported panel filters after washing and under high airflow conditions.

The effective filter media area shall be not less than 3,4m2 of media per m2 of filter face area and shall contain not less than 42 pleats per linear m for a 50mm deep filter.

For 150mm deep media area shall be not less than 7,9m2 per m2 of filter face.

Initial pressure drop at 2,5 m/s approach velocity shall not exceed 60 – 80Pa for 50mm deep and 30 – 40Pa for 150mm deep.

The filter media shall have an average ASHRAE arrestance of 90%.

The media shall be color coded for correct directional placement in filter bank, white for first stage and blue for second stage.

 

FRAME

The enclosing frame shall be the PAK FRAME modular type, the components manufactured from corrosion resistant steel with a minimum thickness of 0,5mm.

The PAK FRAME sides shall have returned edges of at least 10mm for extra strength and safety when handled.

The PAK FRAME 90 corner pieces shall guarantee during manufacture that the finished filters are always square.

The inside periphery of the enclosing frame shall be permanently bonded to the media pack with expanded urethane thus eliminating the possibility of air bypass.

A permanent identification and airflow direction label shall be affixed to the filter frame.

For more information regarding our Panel Filters, please Contact Us!

Back to Top